Porsche Piwis 3 tester software online update guide

1.Porsche Piwis 3 tester software current software version is V40.700.000(Porsche PT3G VCI);

2.Tools-update

3.Here is a V40.700.010 software update package, need to be upgraded, click to start installation;

4.Updating

40.700.010 update successsfully

5.Software version after the update is complete；

update history

Today,let’s learn how to use Xtool X100 Pad2 with KC100 Adapter Program 5th IMMO for Audi A6L 2013 .

The first one key is original and the remote is working,the second one is blank to be programmed.

Guide in words step by stpe :

1. Tap “X100 pad2″on the screen.

2.Tap “VW/Audi Skoda/Seat”

3.Tap “4th/5th immobilizer system”.

4. Have two options”4th immobilizer system” and “5th immobilizer systerm”,Audi A6L 2013 is 5th immobilizer systerm.

5. It can’t indentify the VIN code because the ignition doesn’t turn on,just go to switch the ignition on.

6. 5th immobilizer system function menu.

1). Read immokey.

2). Show security data

Have 3 keys.

3). Make dealer key.

Please plug the KC100 into tablet,press(OK) to continue.

The KC100 adapter indicator turn blue means it powers on.

Put the original key into the coil of KC100 adapter.

Then put the blank key that ready to add to the coil of KC100 adapter

Writting key……

Create dealer key success.

4). Learn the key.

Turn the ignition on,click “OK”.

Read the note

Input the number of keys to match

put the blank key to the sensor area.

7. The first one learn successfully.

8. Then put the second one to learn,after learn with success,it prompts”Learning success”

9.Finish match the key

10. Tap “Return” button to exit the system.

To identify the two keys are working or not.

They are working fine.

11. Now I take one key outside of the car and leave one key in the car.

Start the engine. the first key can turn on.

12. Take the first one outside of the car,and another one in the car,start the engine,the key start turn on ok.

The remote is working.

13. X100 PAD 2 with KC100 adapter successfully program 5th immo for audi A6L 2013. Thanks.

Project Piwis 3 PT3G => VAS6154-Kolun a look at below link when you take your right to use
1 have to have installed piwis 3 laptop.
2. install piwis 3 driver
3 put together vas6154 install the drivers for vas6154-piwis // attempt to update interface Flesch, if you see 6154 as pt3g then it is ok if nevidi next step =>
4 separated you from laptop
5. Copy the deteskop and install VAS 6154 driver 3.0.2.807 // installation after installation tend to deteskopa the trash
6 interface connects you 6154
7 program you run driver
8 interface you see 6154
9 select USB. Save.
10 restart.
11 tart driver program tach app (the first option above left) choose passthru> pt3g-3 piwis install seeks interface.
12 restart
13 Interface joints run driver VAS6154 seen as a passthru pt3g update memory device, check the USB version pt3g dal see you ok almost 6154

Note: please be careful and do it on your own risk.
Autonumen.com will not give support

Contributor: ibi1961

Update: Unless you find the 08 firmware
The picture below is VAS 6154

VERY IMPORTANT:

For sake of security, you’re advised to use odis with vas6154 and use piwis with porsche tester 3 with relief!

Piwis III V37.250.020 – confirmed to work no issues with Vxdiag Porsche

Diagnostic test: passed

Coding: passed

Programming: passed

attached VAS 6154 driver download, installation instruction, wlan setup….

https://www.autonumen.com/goods-6727-Newest-VAS6154-Diagnostic-Tool-ODIS-Plus-Dell-D630-laptop.html